Still Life Chapter 7 Walkthrough Page 4 - Archives Security Corridor
Complete Set Of Walkthroughs For Still Life
The Door Control for the Bomb Squad Room
Along the wall to the right of the door to the Bomb Squard Room you'll find the electronic door control.
Use the Screwdriver on the Door Control
To open the Bomb Suqad Room door, you first need to use the screwdriver on the Door Control.
Use the Taser on the exposed Wires
With the door control disassembled, you can now use the Taser on the exposed Wires.
The Vent and Robot Controls in the Bomb Squad Room
Once you are in the Bomb Squad Room you will see a small vent in the corner of the room to the right of the door, while the robot controls are against the wall on the far right of your screen.
The Robot Controls in the Bomb Squad Room
To deploy a robot click the round red button to the center right of the console. Then once it is deployed click on on the control pad at the bottom right of the console.
Use The Robot To Open The Door
To open the door to the Archives security console, climb the door with the robot then point it towards the door control panel. It will then use its laser to destroy the panel, opening the door.
Breaking Into The Bomb Squad Room
When Victoria reaches level B3 the first thing you'll need to do is get into the Bomb Squad Room. To do this you'll first need to find the electronic door control. It's along the wall just to the left of the door to the Bomb Squad Room. Once you have a close-up view of the panel you'll need to use the screwdriver on the screws at the bottom of the panel. Once you have done this, all you"ll have to do is use the Taser on the wires. That will cause the door to open, so that you can walk on in.
Accessing The Archives Security Corridor
Once you are in the Bomb Squad Room you can check out the rack of Assault Rifles, then turn your attention to the ventilation grate. You'll need to click on it to get a close-up view of the grate, then use the screwdriver on the screw. There is one on either side of the grate. Once you have removed the screws, Victoria will remove the grate from the wall.
Now you can activate the robot control console and press the Release button to release a robot. Then click on the arrow and laser control pad on the panel. The robot will automatically enter the grate and do to the Archive Security Corridor. Once the robot is in there, just walk it over to the door, and then up the door. When the robot is across from the door control panel, simply turn the robot to face it. The robot will then use its laser on the control panel, destroying it, and causing the door to open for Victoria.
